Click the button, can you see the red light?
If not, it means the button is not powered now.
Please help replace the battery and check whether it can work normally or not.
If you want to use the Button to control the light directly without using the Aidot APP, please follow these ways.
1. Power on the light and make the light and button within the Bluetooth distance.
2. Short-click the button 3 times till you can see the red light blinks quickly then release.
3. Wait for some seconds, then you can control the light via the Button and the red light will disappear. (Ensure the pairing process is completed within 1 minute, since the red light will auto-off 1 minute later and you need to click the button 3 times again.)
Turn on/off: Short-click once.
Adjust brightness: Long-click the button.
Adjust color temperature: Short-click the button twice. (Only support the warm white and cool white now)
If you want to program the function of the Button and control the assigned light, which needs you to add the Button to the Aidot APP first, please follow these ways.
1. Make the Phone and button within the Bluetooth distance.
2. Reset the button and make it in the paring mode. This is the reset way: Open the cover and press the Reset button for 3-5 seconds till the red light blinks quickly then release.
3. Open the AiDot app. Home Page>Add Device>Nearby>Then please follow the tips of the APP>Finally you can program the function of the Button and control the assigned light on the Aidot APP.
4. After adding the Button to the Aidot APP, please help short-click the button once, then power on the light and make the light and button within the Bluetooth distance. Wait 3-5 seconds, then you can control the light via the button. (Ensure the pairing process is completed within 1 minute.)